YouthPOWER YP-10000U/15S, User Manual

Page: 9 / 23

version: 2020/01/01
- 8 -
www.youth-power.net
Temperature, Over
current, Short
circuit, Reverse
connection, Failure
protection
OFF NO OFF OFF OFF OFF OFF OFF
Stop
discharging
Fault
/ OFF NO OFF OFF OFF OFF OFF OFF
Stop charging
or
discharging
⚫
Chart 2: Battery Capacity
Status Charging Discharging
Capacity LED Indicator
L6 L5 L4 L3 L2 L1 L6 L5 L4 L3 L2 L1
Capacity
0
～
16.6% OFF OFF OFF OFF OFF Flash OFF OFF OFF OFF OFF NO
16.6
～
33.2% OFF OFF OFF OFF Flash NO OFF OFF OFF OFF NO NO
33.2
～
49.8% OFF OFF OFF Flash NO NO OFF OFF OFF NO NO NO
49.8
～
66.4% OFF OFF Flash NO NO NO OFF OFF NO NO NO NO
66.4
～
83.0% OFF Flash NO NO NO NO OFF NO NO NO NO NO
83.0
～
100% Flash NO NO NO NO NO OFF OFF NO NO NO NO
RUN Status
NO Flash
3.4.
Connectors
Charge / Discharge connectors: to connect the positive pole (+) and negative pole (-) from the battery
to the inverter via DC isolator.
Canbus / RS485: Active communication portal between battery and inverter.
USB To RS232: to get dynamic monitoring data of the battery from upper computer.
Address: Reserved Address portal for multiple parallel connections.
3.5.
Wake Up button
⚫
Battery On: When battery is shut down, press this RST button for 3 seconds. It is activated
when the LED lights flicker from RUN light to the lowest capacity indicator.
⚫
Battery off: When battery is activated, press this button for 3 seconds. It will be shut down
when the LED lights flicker from lowest capacity indicator to RUN light.