7
Please Note:
For Manual time setting, before you set the time, you must make the
Icon Disappear , by pressing the wave button and holding for 3
seconds.
8. Time and Alarm Setting
8.1 Radio Controlled Clock:
After batteries inserted and main unit finishes receiving the transmission from
outdoor sensor, the clock automatically starts to scan the MSF time signal. Radio
Control Icon“
” flashes on the LCD.
flashes
，
Indicating now is receiving
MSF signal
turns on,
Indicating signal received
successfully
disappear,
Indicating signal reception
failed
The clock automatically scans the time signal at 2.00 a.m. every day to maintain
accurate timing. If reception fail, scanning stops (“
” on LCD disappear)
The clock can be set to scan the time signal manually by holding “WAVE“button
for 3 seconds. Each reception takes about 5 minutes. If receptions fail, scanning
stops.
Stop scanning by holding “WAVE“button for 3 seconds.
“DST” shown on the LCD if it is in daylight saving time mode.
8.2 Manual Time Setting:
Hold “MODE” button for 3 seconds to enter Clock/Calendar setting mode.
Press “+” or “-” button to adjust the setting and press “MODE” button to confirm
each setting.
(By keeping the “+” or “-” button pressed, could accelerate the process and reach
the desired value more quickly)
The setting sequence is shown as follow: 12/24 Hour, Hour, Minutes, Second, Year,
Month, and Day.
Note:
(1)
Second adjusted to zero only.
(2)
The time setting mode will automatically exit in 15 seconds without any
adjustment.
