5
Install the wireless 5-IN-1 sensor in an
open location with no obstructions above
and around the sensor for accurate
rain and wind measurement. Install
the sensor with the smaller end facing
the North to properly orient the wind
direction vane.
Secure the mounting stand and bracket
(included) to a post or pole, and allow
minimum 1.5m off the ground.
1.5 meter off
the ground
Add rubber
pads befor
e
mount on
the pol
e
Point to
NORTH
POWER UP CONSOLE
Your console can pairing up with the wireless 5-IN-1 outdoor weather sensor and up to 7
optional wireless sensors. (Not included)
INSTALL THE BACKUP BATTERY
1 .
Remove the battery door of the console.
2 .
Insert a new button cell battery.
3 .
Replace the battery door.
NOTE:
The backup battery can backup: Time & Date, Max/Min & Past 24 hours weather records, Alert
setting values, offset value of weather data and Sensor(s) channel history.
The built-in memory can backup: Router setting and Weather server setting
POWER UP THE CONSOLE
1 .
Plug the power adaptor to power up the console.
2 .
Once the console power up, all the segments of the LCD will be shown.
3 .
The console will automatically start AP mode.
NOTE:
If no display appears on the LCD after you plug the adaptor, press
[ RESET ]
key by using a
pointed object.
SET LCD DISPLAY VIEWING ANGLE
Press
[ ]
or
[ ]
key in normal mode to adjust LCD viewing angle to fit table stand or wall
mount situation.
