4
Activate Upper & Lower Limit of Outdoor Temperature Alert function
Deactivate Alert function for Outdoor
Temperature
Hold “ALERT” button for 3 seconds to enter Outdoor Upper Temperature Alert setting.
Icon “
” beside Temperature’s digits flash. Press “
▲
” or “
▼
“ button to adjust
setting for alert value, Press “ALERT“ button (B5) to confirm the setting, and move to
the lower limit temperature alert setting. Press “
▲
” (B2) or “
▼
“ (B4) button to
adjust the alert value, press “ALERT” button to confirm and quit the setting.
When it’s alert, the corresponding icon “
” or “
” would flash on the LCD. Press
any buttons to stop the alert sound
,
otherwise, it will sound for 2 minutes, and stop
automatically.
Note: The Setting Mode will automatically exit in 15 seconds without any adjustment.
6.5 Frost Alert
”
is shown if the outdoor temperature is between -2
°
C ~ +3
°
C
7. Low battery
The low battery icon “
”will appear l indicating that thermo sensor is in low
battery status. The batteries should be replaced.
8.
Precautions
Use a pin to press the reset button (B3) if the unit does not work properly.
Avoid placing the clock near interference sources/metal frames such as computer or
TV sets.
Do not expose it to direct sunlight, heavy heat, cold, high humidity or wet areas
The outdoor sensor must not be set up and installed under water. Set it up in away
direct sunlight and Rain
Never clean the device using abrasive or corrosive materials or products. Abrasive