All Rights Reserved. - 13 -
YOUNGWOO TELECOM Network Development Team
3 Cable Preparation
A Before network connection, first, prepare cables to be used upon network access. Upon connection of
YC-201 VDSL Modem
to the network, the following types of cables are necessary for each port.
Port
Cables used
Phone line port (PHONE)
One RJ-11 phone cable
LAN port(10/100Base-T)
RJ-45 UTP Category-3,4,5 Straight-through cable
<Table 4> Cables used for YC-201 VDSL Modem
B RJ-11 phone cable: Connect one side of RJ-11 phone cable to phone line port (PHONE) at the back
side of
YC-201 VDSL Modem
and connect other side to phone. Also, connect phone line from
existing wall to VDSL LINE Port.
C RJ-45 UTP LAN cable: Connect one jack of RJ-45 UTP LAN cable to LAN port (10/100Base-T) at
the back of
YC-201 VDSL Modem
and connect other jack to LAN card of PC.
CAUTION
Although cables look same, the type of cables and internal pin connection can be different. Therefore,
you must attach a label to cables together used with YC-201 VDSL Modem to avoid them to be mixed
with those used by other products.
