young time 212439 Instructions Download Page 2

Page: 2 / 4

Page 2 of 4

Assembly Instructions:

Align holes in the face of the Top-

with 2-Guards-

and

. Ensure groove and counter bored holes

are up and Guard with warning label is under back groove as shown. Secure with 4-

XAUR

Decorative

Screws with 4mm Hex Wrench provided.

Align dowels with LH side-

ensuring back groove is aligned with Top. Align and install the Shelf-

(with rounded edge down) and Bottom-

(with groove aligned with side groove and Floor Glides

exposed) in the same manner. Secure with 4-

XAUR

Decorative Screws into Side Rails and Shelf

ONLY

with 4mm Hex Wrench provided.

Summary of Contents for 212439

Page 1: ...h sharp points Adult assembly required FALL HAZARD Children have suffered serious injuries after falling from changing tables Falls can happen quickly STAY in arm s reach of child SUFFOCATION HAZARD B...

Page 2: ...as shown Secure with 4 XAUR Decorative Screws with 4mm Hex Wrench provided 2 Align dowels with LH side F ensuring back groove is aligned with Top Align and install the Shelf D with rounded edge down a...

Page 3: ...d in the groove on the Side Top and Bottom 4 Install 3 XCPT screws into the pre drilled holes in the shelf between the backs Do not tighten 5 Align dowels with remaining RH Side G Secure with 4 XAUR D...

Page 4: ...up Insert 8 XAQB Cross Dowels into 10mm holes in the Bottom and Top Install 8 XAQA Connector Bolts thru holes in the Sides and into Cross Dowels Use a screwdriver if needed to turn align cross dowel...