aquaMAX
TM
-Basic 360 Series
2-4. The Connection of Feed Water
［
Figure 2-3
］
The Connection of Feed Water
Cut the Ø6 seal hose tubing supplied with the system properly and connect to the one-touch type of FEED
fitting on the back-side. Then please connect the other side to the tap water.
2-5. The Connection of the Produced Water
For the aquaMAX 360, 362 type, close the one touch fitting on ION (PRODUCT 2) on the back side with a
supplied plug and insert Ø6 tube into the one touch fitting at R.O.(PRODUCT 1) as following
［
Figure 2-3.
］
Connect the other side of tubing to the reservoir tank
For the aquaMAX 361, 363 type, connect tubings to both R.O.(PRODUCT 1) and ION (PRODUCT2) as following
［
Figure 2-3-1
］
. It can produce either R.O water or De-ionized water by selection from a service menu. It’s
available to connect a sensor to check the level of water in a tank when you connect a reservoir tank.
13
