STEP5
Align the holes of the folding tube with the holes on the vehicle's
2" hitch receiver
, then connect the two parts as shown below.
Place an
M16 shockproof bolt
(10)
, through the
φ
16 Spring
Washer
(11)
,
φ
16 Flat Washer
(12)
and the aligned holes. Secure
the bolt in place with the
φ
3.8 Cotter Pin/Lock
(13)
making sure
to place the pin through.
The diameter of lock beam
should be less than
7mm.
The lock is not included.
2"