10
4.4 Workpiece Connection
Connect the quick plug with earth clamp to the positive terminal on the front panel below.
And then tighten them up. Access the earth clamp to the workpiece.
Warning!
It is forbidden to connect the workpiece to the welder with iron or other poor
conductors.
5 Operation Instruction
NOTES: Finger or round bars especially metal rod must be less than 12.5mm and it
can not be inserted into the welder. Also you can not press it heavily.
1 Positive Terminal
2 Negative Terminal
3 Power Indicator
4 Knob
5 Abnormal Indicator
6 Digital Display
7 Power Cable
8 Switch
NOTES: When the welder works for a long time, the high temperature indicator
will light. This means the inside temperature has exceeded its standard. The
machine will stop, it is normal, after a little time cooling, the machine can recover
the work automatically.