-3-
Our products the operating mode is timed off after timing on, so PV is "P1"/"SV" is "2".
After P1 is set, wait for 3 seconds. The device automatically saves the Settings and rolls
back display.
3. After setting the Operating mode,short press the set button, PV digital tube is blinking, press the
increase /decrease key to set the corresponding time. the device after the time is on. Press the
set again, then SV digital tube is blinking, press the increase /decrease key to set the
corresponding time. The device after the time is off. Our products PV is "0", SV is "20".
Set the value, the device is on after the value.
Set the value, the device is off after the value.
4. During the operation, it starts counting down and stops working when counting down to "0".
5. During operation, the therapy can be stopped by press the power button at any time.
6. Automatically save the last setting after power off, and continue working after power on.
7. When the product is powered on, it will automatically start running. In the running state, long press
the "restart" key to restart.
FUNTION
USER INSTRUCTION
Power switch
Connector of power cord
Switch between multiple devices
1.Place your device
A: Using the hook, hand it on the place that`s most convenient for you.
B: Using the stand, set it on the place that`s most convenient for you.
Note:Distance Apply the light from0-18".
2. Input voltage AC110-240V
Flip the power switch and set the timer as your request. Then the device will work.
Exposure each area for 5-30 minutes, depending on the distance, Than move to next treatment area.
3.Enjoy the red light device
WE RECOMMEND
Expose your skin for best results
For skin issues, we want between 5 J to roughly 15 J per area. So optimal treatment times with
the lights are:
-4-
Code
Item
Vlue
Introduction
P1
Operating mode
0
1
2
3
4
5
Timed on
Timed off
Timed off after timing on
Timed on after timing off
Cycle timing on-off
Cycle timing off-on
A. 30 seconds to 2.5 minutes per area (if the light is 6" away).
B. 1 to 3.5 minutes per area (if the light is 12" away).
C. 2 to 5 minutes per area (if the light is 18" away).
For deeper issues (muscle bone brain, organs, glands, fat, etc.).
，
，
We want around 20-60 J per area, so optimal treatment times and treatment distances are:
A. 2 to 7 minutes per area (if the light is 6" inches away).
B. 5 to 10 minutes per area (if the light is 12" away).
C. 8 to 15 minutes per area (if the light is 18” away).
Frequency: Do this 2 to 14 times a week nutil results are felt.
MOUNTING BRACKET SELECTION
Flat push bracket
7 type bracket
Manual hanging bracket
Electric hanging bracket
Note: For detailed instructions, please read the bracket installation manual
SCENE USE
WHAT ARE THE BENEFITS OF RED LIGHT?
Research shows, that the wavelengths in the spectrum of 660-850nm show optimal biotical
response.
●
Skin rejuvenation
●
Speed wound healing
●
Enhanced blood circulation
●
Aging spots and wrinkle removal
●
Increase collagen
Weight loss
●
●
Decreases pain
●
Anti-inflammatory
Chronic fatique
●
Even though this technology don’t have side effects, we suggest taking the following precautions.
●
Not intended for the use by children and pregnant woman.
●
Do not exceed 30 Min. On one treatment.
●
Don’t stare directly at the light, or were eye protection when lighting.
Contact your doctor if you :
a. Have any medical questions .
b. Suspect that you have had a negative reaction from using the device .
c. Are taking drugs known to cause light sensitivity .
Address: Floor 4, A Building, Le Hua Hang industrial zone, No.37 Kengwei Road, Shiyan Town, Bao'an, Shenzhen,China
Email: [email protected]
Tel: +86 139 2341 0020
Fax: +86 755 2735 3419
