RED LIGHT THERAPY
Instructional Manual
SAY HELLO TO YOUR RED LIGHT
660nm of red light.
This light can be seen by the eyes and targets skin cells.
850nm of near infrared light.
This light cannot be seen by the eyes and targets deep tissue.
-1-
THIS PACKAGE INCLUDES
●
●
1* Red light device
1* Power cable
1* eye protection
1* door hook
2* rope clip hanger
1* User manual
TIME CONTROLLER EXPLANATION
Thank you for purchasing our red light therapy, we hope you can get benefits from our device .
Before starting your first session, please make sure to read this manual as it may explain important operating
procedures. The red light devices use red 660nm and Infrared 850nm leds which is chosen to give the ideal
wavelengths found in the scientific research of the last three decades .
SPECIFICATION
Product Name
>110 mW/cm² @6inch
265*220*70mm
10.43"x8.66"x2.76"
Power
Actual Power
Input Voltage
LED QTY
Bean Angle
Irradiance
Spectrum
Material
Dimensions(mm)
Lifespan
Net Weight (kg)
YL-IRP-001
500W
150W
AC110-240V
100pcs 3W(default) / 5W
30° or customized
850:660 1:1 or customize
lron
50,000
2.50kg
>120 mW/cm² @6inch
480*220*70mm
18.90"x8.66"x2.76"
YL-IRP-002
1000W
300W
AC110-240V
200pcs 3W(default) / 5W
30° or customized
850:660 1:1 or customize
lron
50,000
5.10kg
-2-
Increase Button
Set Button
Decrease Button
PV time1
SV time2
Restart Button
RED-LIGHT-THERAPY FOR HUMAN
>130 mW/cm² @6inch
690*220*70mm
27.17"x8.66"x2.76"
YL-IRP-003
1500W
450W
AC110-240V
300pcs 3W(default) / 5W
30° or customized
850:660 1:1 or customize
lron
50,000
6.90kg
>135 mW/cm² @6inch
920*220*70mm
36.22"x8.66"x2.76"
YL-IRP-004
2000W
600W
AC110-240V
400pcs 3W(default) / 5W
30° or customized
850:660 1:1 or customize
lron
50,000
8.90kg
OPERATION GUIDE
1. Turn on the power switch, the time controller is on. Long press the "set" button, the is "P0",
and press the increase/decrease button to select the type of timing unit: 0,1,2; Our products
is "1",that means the timing unit is minute.
PV
SV
Code
Item
Vlue
Introduction
Remark
P0
Timing unit
0
1
2
Second
Minute
Hour
Time range: 0-999s
Time range: 0-999min
Time range: 0-999h
The PV setting is "P0"
SV setting is timing unit
0 means the timing unit is second
1 means the timing unit is minute
0 means the timing unit is hour
Our products the timing unit is minute, so PV is "P0" / "SV" is "1"
After P0 is set, wait for 3 seconds. The device automatically saves the Settings and rolls back display.
2. After setting the timing unit, long press the set button, the PV is "P0", then press the set again,
the PV change to "P1", and press the increase / decrease button to select the type of operating
mode: 0,1,2,3,4,5; Our products SV is "2", that means timed off after timing on.
The PV setting is "P1"
SV setting is "2"
