Click this button will be Alternating between Memory
mode(MEM)and VFO mode, the LCD screen will show the MEM-** or
VFO-**(**The figures for 01-20).In Memory Mode the
Tuning
knob is
used to change memory locations. In VFO Mode the
Tuning
knob is
used to change the frequency.
Press the
V/M/SAV
button for 2 seconds(the LCD screen will
display SAVE), the current frequency and current mode will be
stored in the Memory Location selected.
RIT/MOD button
Click this button to enter or exit RIT function. A dash (
-
)will be
displayed to the right of the frequency display as shown above.
When in the
RIT
mode, turning the tuning knob clockwise raises
the frequency (as indicated by the up arrow). turning the tuning knob
counter-clockwise will lower the frequency (as indicated by the down
arrow).
To Change mode, press and hold the
RIT/MOD
for 2 seconds.
This will allow you to change the mode from
CW
to
USB
to
LSB
and
CW
again. Press and hold the
RIT/MOD
for 2 seconds for each
change.
