Change the Frequency Tuning Steps
Pressing the tuning knob lightly will change the tuning step between 10Hz, 100Hz and 1KHz. When
changing the step, the related step position displaying on screen blink twice.
If you Pressing the tuning knob for 2 seconds, the tuning step will be 100KHz. (in the RIT mode, will be
10Hz and 100Hz).
If STEP changed in MEM mode, then it will automatically change to VFO mode
Transmitting
When transmitting on the frequency of: 7.0-7.3MHz, 10.1-10.15MHz(MOD needed) and
14.0-14.35MHz, the
EK-1A
will display TX at middle of LCD. Will show “--” when out of the Ham bands.
Battery life indicator
At front upper corner of display, show “full” if battery voltage higher than 11.5V, showing “empty” when around
9V
Youkits
2014-12.06
