6 - 16
Code 128 Append
This function allows the scanner to append the data from several Code 128 bar codes together before transmitting them to
the host computer. When the scanner encounters a Code 128 bar code with the append trigger character(s), it buffers
Code 128 bar codes until it reads a Code 128 bar code that does not have the append trigger. The data is then transmitted
in the order in which the bar codes were read (FIFO).
Default = On.
Code 128 Code Page
Code pages define the mapping of character codes to characters. If the data received does not display with the proper
characters, it may be because the bar code being scanned was created using a code page that is different from the one the
host program is expecting. If this is the case, scan the bar code below, select the code page with which the bar codes were
created (see
ISO 2022/ISO 646 Character Replacements
on page A-7), and scan the value and the
Save
bar code from
the
on the inside the back cover of this manual. The data characters should then appear properly.
* On
Off
Code 128 Code Page
Summary of Contents for YJ-HF500
