Youin YOU-GO S, User Manual, Page: 7 / 56

7 ENGLISH
1. Hold the handle with both hands and
gently push it forward. When you hear
a “drop”, the power of scooter is turned
on.
The buzzer emits a “drop” sound, the
specific meaning is as follows:
a. When the scooter is
stationary, push it gently and send a
“drop” to indicate that the power is on.
b. When one foot is
accelerating, emits a “drop” sound ,
indicating that the motor is started, and
the other foot can be placed on the
pedal.
c. During the riding process,
one foot presses the rear wheel brake
and sends a “drop”, indicating that the
motor stops working.
d. If the scooter emits a
continuous sound of “drops, drops,
drops”, indicating that the battery is
low, please charge the scooter in time.
2. Hold the handle with both hands,
put one foot on the foot switch, and
the other foot pedal back to accelerate.
When you hear the “drop” sound, you
can put the other foot on the pedal.
3. If you need to slow down, please
use one foot to step on the rear wheel
brake. Release the brake plate when
speed slow down to the desired speed,
the scooter continues to travel at the
current speed.
4. If you need to stop, please use one
foot to step on the rear wheel brake
plate. After hearing the “drop”, continue
to step on the brake plate until the car
stops, and the foot leaves the pedal to
complete the stop.
Note: during in the middle of operating
scooter ,one leg is required to step
on the power switch. Stationary 10
seconds automatic disconnecting
power supply When leaving the riding
switch, the electric motor will not start,
the motor will not start when it is off
the ground, and the motor drive will be
involved when the speed of the taxiing
reaches 5 km.
5. How to use