8
YOU-GO XL
4. Assembling Your Scooter
1. Unfold the handlebar stem and fasten
it. Then unfold the kickstand to support
the scooter.
3. Install six screws (two on each side)
with the included hex wrench.
2. Firmly connect the wires inside the
handle and the stem. Slide the handle
onto the stem. Be aware of the correct
orientation.
4. Verify that your scooter can be
powered on and off.
Summary of Contents for SC4000
