3
Step 1:
a. Fix Pillar (A) with Corner Shelf (H) by M6X32 (K) Bolts, but do not tighten them. Insert Beam (B) on each side of
Corner Shelf (H) then tighten them by using M6X32 (K) Bolts already in place. Repeat this step 5 times to form a
hexagon. See figure 1.
Note: The Beam (B) must be placed with the 4 holes alongside it facing the ground to hang the mosquito netting.
b. Place the Foot Cap (G) on the base of Pillar (A) using M6X15 (J) Bolts. See figure 2.
Step 2:
a. Place the Short Support Tube (D) on top of the Long Support Tube (C ) and screw the Tube Connecters (F) then
fastened together at either side by using M6X22 (M) Bolts. See Figure 3.
b. Insert the Long Support Tube (C ) into the pipes of the Top Hub (E).
c. Fix the Short Support Tube (D) to the top end of the Top Hub (E) by using M6X22 (M) Bolts. See Figure 4.
①
②
Fig. 1
Fig. 2
Fig. 3
M
Fig. 4
A
A
A
A
