YOTRIO BHD128059664001 Assembly Instruction Manual Download Page 3

WARNING! TO REDUCE THE RISK OF SERIOUS INJURY, READ THE FOLLOWING 

SAFETY.

Caution! Always keep children under close supervision while they are playingaround this product. 

Never leave children unattended, Keep pets away whilesetting up the gazebo.

Caution! Check municipal by-laws prior to installing the gazebo.

This product is intended for domestic outdoor use only.

The product should be placed and assembled an flat, horizontal ground.

Consult with your local governing authority/local municipal codes regarding installation of temporary 

structures before assembly.

Ensure there is enough clearance around the product. Before assembling the gazebo, make sure to leave a 

distance of not less than 6

(1.8 m) from any structures or obstructions, such as fences, garages, houses, 

overhanging branches, laundry lines, or electrical wires.

Anchor the gazebo to the ground with stakes for added safety. Stakes are provided to secure the gazebo to

 the ground. If you wish to secure the gazebo to a concrete or wood surface, use anchors suited for these

 surfaces (anchors not included). Do not assemble the gazebo on sandy, muddy or loose soil, as stakes do 

not have enough anchorage in these types of soil.

If more than one gazebo is set up, keep a minimum distance of 10

'

 (3 m) between the gazebos.

Any assembly or maintenance of the product must be carried out by adults only.

Make sure there is sufficient manpower when assembling or moving the product,.

Some parts may contain sharp edges. Wear protective gloves if necessary.

Check all nuts and bolts periodically for tightness. When required, tighten them.

Repairing and replacing parts should be done by a qualified technician.

This gazebo is intended for decorative and sunshade purposes only.

The gazebo is not designed to withstand harsh weather, including high winds, rain and snow, 

Always remove the gazebo in such heavy weather conditions, otherwise it might tlip over and cause damage

 to the product or injuries to bystanders,

During snow days, remove the snow at the top when the snow is thicker than 4" (10 cm). After a period of 

time, usually in 2-3 months, tighten all the bolts.

After some time outdoors, the gazebo roof may get dirty. Rinse the top of the gazebo using water. Do not 

use harsh cleaning agents.

Do not hang any weights on the roof frame.

Do not climb onto the roof of the gazebo. Falling off the gazebo can result in serious injury.

After a few years, if the paint peels off, use paint of similar colour. It is recommended to use outdoor paint.

Retain the original packaging to store the gazebo.

If the product will not be used for a long period of time (eng. winter time), it should be disassembled and

 stored in a clean, dry environment.












Summary of Contents for BHD128059664001
















Reviews: