YOTON Y7, User Manual, Page: 13 / 36

Bluetooth Connection
You can set the Bluetooth as below:
1. Open the projector and go to the "Setting"
2. Click the "Sound" Item and select "BT Setting" option, search and connect the
projector with your Bluetooth sounds.
O
< Sound
Sound Mode
Balance
Auto Volume
BT Setting On
BT Setting
Search
Bluetooth Headphones
Bluetooth Sound Bar
On
Disconnected
Disconnected
Important Safety Warnings
The following safety instructions ensure the long service life of the projector to avoid
fire or electric shock. Make sure to read them carefully and pay attention to all the
following warnings.
1. Do not install the projector in sites with improper ventilation. Keep the back of the
projector well ventilated so it can cool the system without problem. Do not block the
ventilation holes.
2. Do not install the projector in dust and smoke sites.Do not install the projector near
the temperature and smoke transducer. It may cause a sensor failure.
3. Do not install the projector in sites with direct blowing of warm and cool air-condition
wind. Otherwise it may cause the project failure due to moisture condensation or
temperature increment.
4. No water-proof function for this projector, apparatus like vase or cup should not be
put around the projector.
5. No peeking into the lens while projectors is working.
6. Please turn off the projector and cut off the power supply, if it is not used for a long time.
7. To avoid risk of electronic shock, do not disassemble or repair the device. Incorrect
repair may cause risk of electronic shock or injury to people during operating. If projector
is defected, please contact our after-sale service team: support@yoton.co
7
EN