20
7.7 Parts replacement procedure
Part name
Disassembly
(See 7.5.)
Reassembly
(See 7.6.)
Cover gasket
Procedure 1
Procedures 6 to 7
Float (P) assembly
Procedures 1 to 2
Procedures 4 to 7
Cock assembly
Procedures 1 to 4
Procedures 1 to 8
Screen
Procedure 1
Procedures 5 to 7
8. Disposal
When disposing the product, refer to the drawing to check material of each part and dispose
them separately according to local rules and regulations.
[Procedure 8]
With applying spanner to the cock (width across flat: 9 mm), adjust the
direction of the name plate. After adjustment, tighten the nut with torque
wrench (width across flat: 22 mm) with torque of 45 N
・
m.
* If the name plate is not in correct direction, the product does not work
properly.
See Caution No. 4, “5.2 Precaution for installation” on Page 8
for
the adjustment procedure.
Torque wrench
(width across flat: 22 mm)
Spanner
(width across flat: 9 mm)
