- 7 -
■EPDT-002f■
７．Assembly after disassembly
●Model ＳＷ－１０
Caution
（１）Clean up the seating surface of gasket on the body and cover, or sealing portion of
O-ring.
※Insufficient cleaning can result in outer leakage and injuries or scalding.
（２）Use a new gasket at assembly.
※Used gasket may result in outer leakage.
（１）Clean the gasket contacting surface of the Screen case and cover. Attach a new
gasket to the cover.
（２）Put a cleaned screen into the screen case and attack the cover. Tighten the hex nut.
●Model ＳＷ－１０Ｓ
Caution
（１）Clean the contacting surface of the screen case and cover.Make sure that O-ring is
attached properly.
※If the O-ring is not installed properly,O-ring may be damaged and can be result
inouter leakage.
（２）In case O-ring is damaged or deteriorated, change to new o-ring and apply the grease
on it.
※There is a possibility of leakage in case o-ring is damaged or deteriorated.
（１）Clean the gasket contacting surface of the Screen case and cover. Attach a new
gasket to the cover.
（２）Put a cleaned screen into the screen case and attack the cover. Tighten the hex bolt.
