background image

 

 

 

ڦ

EPDT-345a

ڦ

 

MODEL STC-1 

STEAM TRAP CHECKER 

 

PRODUCT MANUAL

 

.

 

Thank  you  very  much  for  choosing  the  Yoshitake’s  product. 

  To  ensure  the  correct  and  safe  use  of  the 

product, please read this manual before use.    This manual shall be kept with care for future references. 

The symbols used in this manual have the following meanings.

Please note that Chinese language version 

and Thai language version can be downloaded from the following website.   

Website: http://www.yoshitake.jp/index.html 

ᵢӝ૷Ⲻѣᮽᆿ㻻ֵ⭞䈪᱄Ҝ䈭Ԅԛс㖇൶с䖳

㼔㼠㼠㼜㻛㻛㼣㼣㼣㻚㼥㼛㼟㼔㼕㼠㼍㼗㼑㻚㼖㼜㻛㼏㼚

ถ้าต้องการ

ดาวน์โหลดคู่มือของผลิตภัณฑ์

ภาษาไทยให้

ดาวน์โหลดได้ที 

㼔㼠㼠㼜㻛㻛㼣㼣㼣㻚㼥㼛㼟㼔㼕㼠㼍㼗㼑㻚㼖㼜㻛㼠㼔

 

          Warning 

This  symbol  indicates  a  potentially  hazardous  situation  that,  if  not  avoided, 
could result in death or serious injury. 

          Caution 

This symbol indicates a hazardous situation that, if not avoided, may result in 
minor or moderate injury or may result in only property damage. 

 

 

Table of Contents 

 

1. Usage of the Product ················································· 1 

2. Specifications and Mode   ········································· 1-2 

2.1 Specifications ····················································· 1 

2.2 Mode (function) ··················································· 2 

3. Operation procedure     ··············································· 2 

4. Dimension and weight················································· 3 

5. Before use ···························································· 3-5 

5.1 Precaution for installation ······································ 3 

5.2 Name of the parts   ··········································· 4-5 

5.3 Installing Battery ·················································· 5 

5.4 Peel off protective film of screen ····························· 5 

5.5 Attach/Remove sensor cap   ·································· 5 

6. How to use ··························································· 6-11 

6.1

Switch operation for Power (ON/OFF) and Mode (function) ···· 

6.2 Procedures for steam trap automatic diagnosis mode ··· 7-10 

6.3 Procedures for surface temperature sensor mode ···· 11 

6.4 Procedures for auscultation mode ························· 11 

7. Maintenance ··························································· 12 

7.1 Precaution for maintenance ································· 12 

7.2 Troubleshooting ············································ 12-13 

㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌

  Warranty Information 

                             

 

 

   

 

 

   

 

Summary of Contents for STC-1
















Reviews: