Yoshitake OB-3 Quick Start Manual Download Page 1

 

EPDT-258b

 

 

 

MODEL

 

OB-3,4,3G,4G 

TEMPERATURE REGULATOR VALVE 

 

PRODUCT MANUAL

 

.

 

Thank  you  very  much  for  choosing  the  Yoshitake’s  product.    To  ensure  the  correct  and  safe  use  of  the 

product, please read this manual before use. This manual shall be kept with care for future references. 
The symbols used in this manual have the following meanings. 

 

          Warning 

This  symbol  indicates  a  potentially  hazardous  situation  that,  if  not  avoided, 
could result in death or serious injury. 

          Caution 

This symbol indicates a hazardous situation that, if not avoided, may result in 
minor or moderate injury or may result in only property damage. 

 

 

Table of Contents 

 

1. Usage of the Product ·················································· 1 

2. Specifications ·························································· 1-2 

2.1 Specifications ························································ 1 

  2.2 

Temperature adjusting range

 ······································ 2 

  2.3 Temperature accuracy from set point   ························ 2 

  2.4 Cv value table ························································ 2 

  2.5 

Valve Seat Leakage

 ················································· 2 

3. Dimensions and Weight ············································ 3-4 

4. 

Nominal Size Selection Chart

 ······································· 5-6 

5.

Maintenance and Inspection

 ······································· 7-10 

  5.1 

Cautions before use 

 ················································ 7 

  5.2 

Installation of Main Unit

 ············································· 7 

  5

.3

 Installation of Thermal bulb

 ········································· 8 

  5.4 

Warnings and Cautions for Use

 ··································· 8 

  5.5 

Adjustment Procedures

 ············································· 9 

  5.6 

Example of piping

 ···················································· 9 

  5.7 

Trouble and Corrective Actions

 ··································· 10 

  5.8 Precautions during maintenance and inspection ··········· 10 

  5.9 

How to Disassemble

 ················································ 10 

6. 

Handling of Protection Pipe (Option)

   ························· 11-12 

Warranty Information

 

 

 

 

 

Summary of Contents for OB-3















Reviews: