-8-
■
EPDT-318a
■
7. Storage
Please storage the product in the package by installation. During storage, please follow
these points.
* After open the package for checking product, please storage into original package
again.
* Do not storage the product where rain falls, temperature is above 60
℃,
and dust or
mist make damage for the product.
* Before installation, do not remove seal and plastic cap which is used for pneumatic
and electrical connection.
8. Installation
8.1 Installation for body part
Warning
(1)
Due to heavy product, make sure to use hanging machine to hold the product. When
hang this product up from package, use adequate hanging belt.
Eye bolt is installed at actuator in aim of hanging. When using eye bolt, use both
eyebolt and make hanging belt same load at both side. (See Fig.4)
Besides, do not hold positioner when installation.
*Otherwise product may fall and cause injury.
Eye bolt
Shackle
Hanging belt
Fig.4