■
EPDT-241
■
6
Fig. 3 Piping example
7. Maintenance
Warning
1. Do not touch the product/pipes with bare hands when touching them or operating the lever or operating
with lever [14].
* Failure to follow this notice may result in scalds or injury.
2. Do not touch the product unless it is necessary.
* Failure to follow this notice may result in scalds or injury when fluid is high temperature.
3. When checking the operation of the product, wear earplugs and stand clear of exhaust pipe end during
inspection. Do not look down or touch the open end of the exhaust pipe.
* Failure to follow this notice may result in injury due to discharge. Be aware that the product makes a
loud noise at start-up.
4. Do not disassemble the product.
* Please contact us if any abnormal condition is observed.
Caution
1. Before raising fluid pressure, check that no problems have occurred in the equipment on the piping.
* Failure to follow this notice may damage the equipment.
2. Completely discharge fluid from the product and piping before leaving the product not operated for a long
time.
* Failure to follow this notice may cause malfunction due to rust generation in the product or piping.
3. After leaving the product not operated for a long time, make inspection before start-up.
