1. Remove passenger seat.
2. Remove left and right rear seat covers.
3. Remove rear upper cowl to access license plate
light and turn signal connectors.
4. Locate and disconnect license plate light and
turn signal connectors.
5. While securely supporting the stock fender
assembly, remove the four bolts securing the
fender assembly to the frame. Carefully remove
the stock fender assembly making sure not to
damage the connectors in the process.
6. Disassemble the stock fender assembly and
remove the left and right turn signals.
7. Cut the stock license plate light connector from
the stock fender assembly. Be sure to cut at
least a 6” section of wire from the connector.
Removal
Installation
1. Install (No. 3)
070BG-LH-K,
Yoshimura license
plate light onto (No. 1)
11801-FEBKT-A,
Yoshimura fender eliminator bracket
using
(No. 7)
M4X6BHS,
4mm button head screws.
2. Using the
94785-01-ND
butt connectors
supplied in the kit, connect the Yoshimura
license plate light wires to the stock license
plate light wires as follows:
Red -to- Brown
Black -to- Black/White
3. Using the stock hardware, install left and right
turn signals onto (No. 5,6)
11100-TSB-L/R,
left and right turn signal brackets.
4. Assemble and install (No. 4)
070BP-LPF,
license plate frame and (No. 5,6)
11100-TSB-
L/R,
turn signal brackets to (No. 1)
11801-
FEBKT-A,
fender eliminator bracket using
(No. 8,9)
M6X14BHS & M6X16BHS,
6mm screws, (No. 10)
6MMWASHER,
6mm washer and (No. 11)
6MMLN,
6mm nylon
lock nut as shown.
5. Route license plate light and turn signal wires
through the hole in (No. 1)
11801-FEBKT-A,
fender eliminator bracket and
(No. 2)
11801-
FEBKT-B,
fender eliminator bracket spacer and
through undertail. Install the stock fender bolts
from the bottom and secure (No. 1,2)
11801-
FEBKT-A & 11801-FEBKT-B,
assembled
fender eliminator to frame. Torque bolts to
factory specification.
6. Route wires in stock location and re-connect
license plate light and turn signal connectors.
7. Re-install rear upper cowl and the left and right
rear seat covers.
8. Re-install passenger seat.
9. Check for proper function of license plate light,
turn signals, brake light, and that all brackets
and components are secure prior to riding.
3
7
10
1
3
8
6
2
4
1
5
9
11
1
