YO Analog
User guide
v2.0
page 11/15
3. To create an application, press the bottom right ‘+’ button. Fill in the ‘Name’ and
‘Description’ fields and ‘Select Application Profile’ which is the region definition.
Figure 6
Application creation form.
4. Proceed to the application by clicking its name on the list, and press the ‘+’ button to add a
node. Select ‘Lora’ in ‘Node Type’ field. Set the ‘Name’, ‘Description’ fields and fill in ‘Node
ID’ (
deveui
) and ‘OTAA Key’ (
keyotaa
)
which can be found using the CLI tool
(
list_dev_params
).
Select a model that is compatible with your device—it affects the
number of charts, its placement and data source (YO Analog model). You can also set the
node’s ‘Location’, if locations have been pre-defined. If you haven’t defined a suitable
location, leave this field set at <None>.
REV 2.0.0
Summary of Contents for YO Analog
Page 1: ...YO Analog User guide v2 0...
