P5
3. CANOPY INSTALLATION
Note:
Four screws are pre-screwed on mounting bracket for canopy installation.
Left-hand
side screw
(Removing)
4. BLADE INSTALLATION
Attach blade to blade holder with 3 blade screws and 3 paper washers provided from hardware bag.
Make sure all screws are firmly tightened.
Remove 3 motor stoppers by removing screws.
Secure Blade Assembly to the motor with 2 motor screws provided from hardware bag.
To prevent wobble, do not bend blade or blade holder.
NOTE:
1
2
3
Blade Screw (3)
Blade Holder
Paper Washer (3)
1
Blade Assembly
Motor screw (2)
Motor
Stopper (3)
2
3
Remove left-hand side screw on mounting bracket first and loosen the other one.
(
Please do the same for the other two screws on the across side of mounting bracket.)
Rotate the canopy slightly until both two loosening screws are in the holes of L type slots.
Tighten 4 screws firmly.
Note:
1
2
3
Screw
(Loosening)
L Type Slots
1
2
3
Screw (4)
(
)
Tightening
Blade
6.Turn on the power at breaker box - your fan is ready for operation.
Pull Chain Knob
Connect Pull Chain Knob provided from hardware bag to the pull chain from switch housing.
5. PULL CHAIN KNOB INSTALLATION
Fan Assembly
Switch Housing
