2 |
P a g e
Quick Reference Guide
I.
Prior to installation, please ensure:
1.
The rated voltage of your fireplace fits the output voltage of your outlet;
2.
The light bulbs in your fireplace are in good condition. To check this, please follow
the instructions for replacing the light bulbs on section MAINTENANCE.
II.
The heater on your electric fireplace may emit a slight, harmless odor when first used. This
odor is a normal condition caused by the initial heating of internal heater parts and will not
occur again.
III.
If your heater does not emit heat, please ensure the Heater Switch is on. For further
information, please consult section Operation of the Practical User's Guide.
Marks
NOTE
Procedures and techniques that are considered important enough to emphasize.
CAUTION
Procedures, which if not carefully followed, will result in damage to the equipment.
WARNING
Procedures, which if not carefully followed, will expose the user to the risk of serious injury,
illness or death.
