KEYED WASHER
FRONT PLATE
CHASSIS
6pin
CONNECTOR
INSIDE TEETH WASHER
6559 DPDT SWITCH
PLACE IMAGE HERE
SEE LAYOUT DIAGRAM
NUT WITH ONE SIDE CHAMFER
NUT WITH DOUBLE SIDE CHAMFER
THIS TRIMMED CORNER OF
Z1295 SHOULD BE ORIENTED
CLOSE TO LABELED TABS
Z1295 SWITCH WASHER
ASSEMBLY OF 6549 SPDT AND 6559 DPDT
WITH Z1295 AND NUTS AND WASHERS
PLACE IMAGE HERE
M1423 PRODUCTION NOTES
6. WHEN USING THE CH1343 (NA TRANSFORMER),
THE TRANSFORMER'S MOLEX CONNECTOR MUST BE
MODIFIED AS SHOWN HERE:
1. Screw U1 directly to PCB using 1x YS#8799.
2. Apply RTV to C13 C14 C15 C16 C26 C34 C36 C41.
3. KEYWAY OF S1 AND S5 MUST FACE ARROW ON SILKSCREEN.
4. HARDWARE FOR 6549 & 6559 MUST BE ASSEMBLED IN ORDER
INDICATED IN ASSEMBLY DRAWING.
5. R4 100K #6588 IS HAND INSERTED.
7. FOR CE OPERATION WITH A CH1343U, USE ADAPTER PATCH
CABLE (YS#3088) BETWEEN THE TRANSFORMER AND PCB.
IF A PATCH CABLE IS NOT AVAILABLE, THE POWER SWITCH
PCB CAN BE MODIFIED AS BELOW:
All manuals and user guides at all-guides.com
