V02
5 - MOUNT Q11 WITH #8870 SCREW.
SEE LAYOUT DIAGRAM
M1500
INSERT
JIG PHOTO
HERE
9 - FOR Q1,Q2,Q50,Q51 AND Q5,U8,U11 USE #4022 PAD.
7 - PCBSA: DO NOT BREAK OUT BOARD BEFORE TESTING.
4 - BREAK THE CONNECTION OF XLR J4 SEE PICTURE.
2 - Q20 ,R100 , R101 , R114 , R160 ARE HAND INSERTED.
8 - FOR Q46,Q48 AND Q47,Q49 USE #4125 PAD.
6 - INSERT PUSHBUTTON KNOB ON SWITCH S2 AND S6
BEFORE INSERTING NTO PCB. USE JIG AS SHOWN IN PICTURE
3 - ADD THERMAL JOINT COMPOUND (GOOP)
-BETWEEN INNER AND OUTER HEATSINK.
-MOUNT HEATSINK TO PCB USING TWO #8829 SCREWS.
1- FOR M1500 REMOVE JUMPER X38 DO NOT STUFF L1,C32,C85,R102,W12.
-FOR M1500A REMOVE JUMPER X31 STUFF L1,C32,C85,R102,W12.
PRODUCTION NOTES
Remove this
piece.
Break this
connection here.
PCB
8581
8841
4125 - Sil pad
3719 - Spring
8833 screw
Inner heatsink
Outer heatsink
TO218 parts
Outer heatsink
TO220 parts
8841
8581
PCB
8833 screw
Inner heatsink
4022 - Sil pad
3977 - Yellow spring
