The LP-LED2M may be used in several ways:
Stand alone (separate controller not required), Linked to other LP-LED/X
systems, with a Yorkville Lighting Controller, With a DMX™ Controller. As a Bluetooth
Smart™ device and it’s Battery Powered!.
Function Control & Stand Alone Operation -
The Funtcion Control sets the basic operation of the LP-
LED2M; power, activating
Bluetooth™
or selecting manual settings.
Bluetooth™ Smart Device -
Install the Yorkville LP Control App on your smart device prior
to use. The App is available on the Apple App Store and the Google Play Store. To connect,
open the app and tap on the “Add Lights” button at the top of the screen. It will prompt you to enter
a 4 digit pin code - if a bar is currently unsecured, any desired pin code can be entered. Security pin
codes are cleared when the light bar is powered off, or can be removed from the app. You can con-
nect up to 4 bars at once.
Brightness Control -
This control varies the brightness of all pods in any func-
tion position in any operational mode. The maximum brightness controlled by
the Bluetooth™ app depends on the manual brightness setting on the light bar.
Lamp Color Control -
Any pod can be turned off by setting the Color control
to the off position. There are 31 colors and color choices which begin with red,
followed by blue, white, amber yellow and finally green. There are also several
choices of color temperature for white.
Color Sound to Light -
The LP-LED2M has sophisticated audio to light (color
organ) circuitry. The automatic level circuitry enables signals from weak line level
signals up to loud speaker levels. An internal microphone with automatic sensitiv-
ity triggers the same sophisticated audio to light color organ circuitry. The micro-
phone is active unless a ¼-inch phone jack is inserted to the audio input.
Using Multiple LP-LED2Ms -
Multiple LP-LED/X units may be linked with a
standard 3-pin XLR cable connected through the In and Out jacks (NOT the DMX In/Out jacks). When the
first unit in the chain is not receiving a control signal its controls are active and the downstream units operate
identically to the first unit.
DMX™ Internally Integrated Processing -
Set unit to off position to in order to access DMX. Specific
operating instructions for the DMX™ modes are available in the specific DMX™ controller operation manual.
Battery Status Indicators -
The LP-LED2M has a series of four green LEDs to indicate the approximate
charge level. The upper green LED is illuminated if there is greater than 90% charge in the battery. The
red LED only will indicate that the battery is critically low (less than 10% remaining) and needs immediate
charging. The indicators will be engaged only when the power switch is turned on.
Charging Indicator -
Whenever AC is connected to the unit, the charging indicator will be turned on. If it
is green, the unit is fully charged. If it is red, the unit is in the process of charging.
Charging the LP-LED2M -
To charge the LP-LED2M, plug it into an AC power source using the included
power cord. The charging indicator LED is the best indication of the charging status; even if all of the bat-
tery status LEDs are lit, there is still possibly some additional charging time required. The LP-LED2M can
be safely left connected to AC power for charging indefinitely. It will intelligently control its own charging
regime when plugged in long-term.
Note: The battery charge rate will drop to 1/8th when the unit is between the tempertures of 0°C-10°C
(32°F-50°F), and also 35°C-45°C (95°C-113°C). Charging will be suspended when the unit is below 0°C (32°F) or
above 45°C (113°F).
Printed In CANADA
QuickStart-LP-LED2M-00-1v0 • YS#QSTART-LEDM • October 22 , 2021
B a t t e r y P o w e r e d
S t a g e L i g h t i n g L i g h t b a r
LP-LED2M
To get the full Owner’s Manual please visit our website at
http://www.yorkville.com/manuals/
or, if you need a printed version call
905-837-8777
