5567611-BIM-B-1218
Johnson Controls Ducted Systems
7
Figure 4: ZV component location
Figure 4 shows the ZV-06 through -08 model. Table 1 lists the components of the unit.
Table 1: Component location table
Item
Description
Item
Description
A
Smart Equipment™ supply fan controls with IntelliSpeed™. Includes
screw connectors for thermostat wiring and network connections
K
Power ventor motor
B
Disconnect location, optional disconnection switch
L
Two stage gas heating to maintain a warm, comfortable
temperature
C
Filter access, 2-inch or 4-inch filter options
M
20-gauge aluminized steel tubular heat exchanger for long
life. Stainless steel option
D
High efficiency sine wave fin evaporator coil
N
Intelligent control board for safe and efficient operation
E
ECM outdoor fan motor
O
Slide-out drain pan with 1-inch NPT connection
F
Micro-channel aluminum tube/aluminum fin condenser
P
Toolless door latch
G
Premium efficiency belt-drive blower motor
Q
Compressor access (High-efficiency 2-stage compressor)
H
Variable frequency drive
R
Base rails with forklift slots (three sides) and lifting holes
1
1. Roof curbs in eight-and fourteen-inch heights. Roof curbs to transition from a Ducted Systems ZD Series footprint to the ZV Series footprint
are available as a field-installed accessory.
I
Solid core filter drier
S
Second model nameplate inside hinged access panel
J
Slide-out motor and blower assembly for easy adjustment and
service
