background image

1.5.2 Thermostat connections

1. Yellow cable.
2. Red cable.
3. White cable.

A. Shielded cable, 2 x 0.5 mm

2

. Maximum length:

100 m.

B. Shielded cable, 10 x 0.22 mm

2

. Maximum

length: 100 m.

1.6 Safety and equipment protection systems

The VITALITY range of air conditioning units includes an entire series of safety and protection systems

intended to provide a high degree of safety for users and maintenance personnel.
Those not expressly authorised to use the air conditioning unit must not handle it or perform repair or

maintenance work.

Safety systems
Johnson Controls Inc. manufactures air conditioning units in accordance with EU occupational protection

and user safety regulations, provided that the units are used and maintained in line with the instructions

and indications given in this document.
Given that the air conditioning unit is installed on the roof of a building or property, users must under no

circumstances inspect or adjust the unit themselves. All of inspections or adjustments that may be made

by the user are performed using the DPC-1 thermostat.
The air conditioning unit is fitted with electrical protection systems to protect personnel responsible for

its regular maintenance and upkeep.
As established by applicable electricity regulations, the electrical system is fitted with electricity surge

and current leakage protection system consisting of differential circuit breakers and thermal magnetic

switches (not supplied by the manufacturer, must be installed on site).
Under no circumstances is the user of the air conditioning unit exposed to live parts.
Likewise, access to moving parts by unauthorised persons is prevented. This involves placing appropri‐

ate safety locks on all of the removable covers on the unit.

Unit protection systems
The refrigerant circuit of the unit is protected against excessively high or low pressure and discharge

temperature. It is also protected against repeated cold start-ups caused by the compressor intake sensor

when the summer cycle is activated.

User manual

1

Safety and equipment protection systems

1.6

9

Summary of Contents for VITALITY series















Reviews: