York Solution Field Disassembly And Reassembly Download Page 5

5

YORK INTERNATIONAL

FORM 102.20-FA1 (1104)

Table 2 - Gasket/Caulk/Adhesive/Grommet for Solution Units

PART 

NUMBER

DESCRIPTION

WHERE USED

026-30458-000

Connector, Flex Fabric 8"

Between fan opening and opening in panel

010-01017-010

Caulk, Sikafl ex, 221 SF, Sika Corp or Equal

Corner connectors & raceway; inside corners where 
corner connector, raceway and panels meet; wireway and 
bulkhead seal

010-02917-000

Ins Therm 1/8 x 1-1/2 x 50 Lg, Ind. Rolls C3-
241-DC 221 White Ethafoam, W/psa, Std 
R749 DTD 10/8/90 Marriage Tape

Coil seal, bulk head seal

013-02966-011

Caulk, Manus-bond,75-am, Manus Products, 
or Equal

Corner connectors & raceway; inside corners where 
corner connector, raceway and panels meet; wireway and 
bulkhead seal

013-02976-010

Tape, Butyl, 0.75W x .19THK, TC-49 Xl 121, 
Manus Products, or Equal

Outdoor units, between raceway 0.688 Flanges and 
panels/ roof/drain pan/pipe chase/control enclosure, 
panel to panel (vertical)

013-02977-010

Tape, Butyl, 1.5W x .13THK, TC-49 Xl 121, 
Manus Products, or Equal

Outdoor units, between top raceways & along roof sides 
& between bottom raceways & curb rest

013-02978-010

Tape, Butyl, 0.5W x .13THK, TC-49 Xl 121, 
Manus Products, or Equal

Outdoor unit doors along sides when door is between two 
panels

013-02979-010

Tape, Butyl, 0.5W x .25THK, TC-49 Xl 121, 
Manus Products, or Equal

Outdoor units, between raceway 0.688 Flanges and roof

013-03317-010

Caulk, Solvent Free, Pace Gray or Equal, 
Sikafl ex 221 SF or Manus-bond 75-AM

Corner connectors & raceway; inside corners where 
corner connector, raceway and panels meet; wireway and 
bulkhead seal

013-22013-010

Adhesive, Super Fast,#74, 3M or Equal

Fan fl ex connection

028-11778-010

Gasket, Neoprene, Closed Cell, B/G, 1.25W x 
0.25THK, Scott Mfg or Equal

Split, bottom, sides, top panel to panel ends butt to butt

028-11791-010

Gasket, Polyurethane, Open Cell, B/G, 1.0W x 
1.0THK, Scott Mfg or Equal

Filters

028-11861-000

GROMMET, SUPPLY/RETURN 
COIL HEADER, 1/8” PVC, For 3.00” 
CONNECTIONS

Coil Header Panel, For 3.00” Connections

028-11861-000

GROMMET, SUPPLY/RETURN COIL 
HEADER, 1/8” PVC

Coil Header Panel

01620

Gasket, Door, _____" High x _____" Wide

Door (see example below)

028-11864-010

Gasket, Neoprene, Closed Cell, B/G, 0.75W x 
0.5THK, Scott Mfg or Equal

Between vertical bulkheads and panel

028-11865-010

Foam, #2 Polyester, Open Cell, 2W x 2THK, 
4LG, Scott Mfg or Equal

Wireway at pressure transitions.

028-11865-010

Gasket, Neoprene, Closed Cell, B/G, 1.0W x 
2.0THK, Scott Mfg or Equal

Wireway at pressure transitions.

028-11866-001

Tape, Polyethylene, Double, 0.375W x 
0.032THK, 5,184 In / Roll, or Equal 

Between raceway double fl ange, between the liner 
fl anges and out fl anges of panels

028-11866-002

Tape, Polyethylene, Double, 0.375W x 
0.032THK, Spool, 60,000 In / Spool, or Equal 

Between raceway double fl ange, between the liner 
fl anges and out fl anges of panels

028-11866-010

Tape, Polyethylene, Double Sided, .38W x 
0.13THK, Acrylic, Adhesive

Between raceway double fl ange, between the liner 
fl anges and out fl anges of panels

028-11867-010

Gasket, Neoprene, Closed Cell, B/G, 1.25W x 
.50THK, Scott Mfg or Equal

Between roof panels, type 8 fi lter tracks under the 
bulkhead

Continued on next page

Example For Ordering Door Gasket:

Door is 35-1/2" High by 21-1/2" Wide

Order P/N 1620 35-1/2' High x 21-1/2" Wide.

Summary of Contents for Solution

























Reviews: