1
SET TEMPERATURE
( )
AU TO
COO L
DRY
HE AT
FAN
HIGH
ME D
LO W
MODE
FA N SPEE D
ON/OFF
SWIN G
TIMER ON
AI R
DIRECTION
TIMER OF F
LE D
DISPLA Y
RESE T L OC K
TEMP
TIMER ON OF F
2
Set the starting & stopping time
1. Push the TIMER ON button, the remote controller
will show TIMER ON, the last set time for START
operation and the signal “h” will be shown on the
LCD display area.
You are now ready to readjust the TIMER ON to
start the operation.
2. Push the TIMER ON button again to set the time
you want to start the operation.
3. Push the TIMER OFF button, the remote controller
will show TIMER OFF, the last set time for STOP
operation and the signal “h” will be shown on the
LCD display area. You are now ready to reset the
time to STOP operation.
4. Push the TIMER OFF button again to set the time
you want to stop the operation.
5. After setting the TIMER, there will be a one-half
second delay before the remote controller transmits
the signal to the Air Conditioner. Then, after approxi
-
mately another 2 seconds, the set temperature will
re-appear on the digital display.
Notes:
- The timer setting (TIMER ON or TIMER OFF) that in sequence occurs directly
after the actual time will be activated rst.
- If the same time is set for both TIMER ON and TIMER OFF settings, the
TIMER OFF time will automatically increase 0.5h (the set time is less than
10 hours) or
1
hour (the set time is more than 10 hours). If the time settings
for both TIMER ON and TIMER OFF are 24 hours, the TIMER ON settings
will automatically decrease 1 hour.
Change the TIMER
To change the TIMER ON/OFF time, just press the corresponding TIMER button
and reset the time.
8
Timer operation