Warning Decals
SAFETY SIGNS
Safety and operational decals (
as shown
on
this page and the next page
) are installed on
the drag conveyor in the locations indicated.
Be certain all decals are in their proper locations
on the conveyor and are in good condition! Check
all safety decals, and replace any worn, missing,
or illegible safety decals. They may be ordered
as any other part is ordered. See the dealer
for additional information or contact the factory
direct at the address listed on
the back cover
of
this manual
.
WARNING
Exposed conveyors
and moving parts can
cause severe injury
LOCK OUT POWER
before removing
cover or servicing
P/N 90204025
1 on each intermediate section cover
1 on each head cover, and
1 on each tail cover
BEARING INSPECTION SCHEDULE
SAFE OPERATION OF THIS EQUIPMENT REQUIRES PROPER MAINTENANCE
BEARING LOCATION:
_________________________________________________
DATE GREASE NAME DATE GREASE NAME
MFS/YORK/STORMOR, GRAND ISLAND, NE
MARK WITH BALL POINT PEN
1
____________________________
7
___________________________
2
____________________________
8
___________________________
3
____________________________
9
___________________________
4
____________________________
10
__________________________
5
____________________________
11
__________________________
6
____________________________
12
__________________________
P/N 90204018
1 on each side of the head, and
1 on each side of the tail
WARNING
P/N 90204012
Exposed moving
parts can cause
severe injury
LOCK OUT POWER
before servicing
1 on each guard cover
Safety
WARNING!
ALL INFORMATION ON THIS PAGE IS
WARNING INFORMATION!
12
GLOBAL
INDUSTRIES, INC.
Drag Conveyors
10230011
2016-06-14