©York Survey Supply Centre 2019
Ref:.. \operat98\instructions 19\53500.qxp 07-01-19
IMPORTANT: READ THIS INFORMATION BEFORE USE!
Assembly Instructions
Do not assemble while plugged into power.
1. Insert stand base (1) into
2. Lamp angle may be
other end of tube. Use the
altered simply by
stand handle (2) to position
loosening the angle
the lamp to the desired angle.
adjustment knob (3)
Insert and tighten angle
moving the stand handle to
adjustment knob (3)
to bring the lamp to the
desired angle, then
tightening the angle fixing
knob
Inserting or Replacing Halogen Lamp
Important: Ensure unit is disconnected from power
point. Allow time for unit to cool before handling.
1. Unscrew retaining screw
2. Lower front surround
on top of lamp. This will
down. It will be retained
release the protective grid,
by the hinges
front surround and glass
faceplate.
3. To insert halogen tube:
4. Carefully replace front
unwrap globe, taking care
surround, making sure it
your fingers do not touch
is correctly positioned.
the tube. Use wrapping
Screw up tightly.
to handle the tube. Push
one end of tube into either
of the spring-loaded sockets.
Locate other end on other
socket, and release.
