Assembling Instructions
WARNING: Please put on all the screws, washers and bolts then tighten them.
ATTENTION: Be careful when you connect the two console-controller wires. There are pins inside
connector, the pins must be straight, and otherwise it will cause problems.
9
STEP1:
1. First make sure to connect the Emergency Wires.
2. Then fix the uprights (2, 3) on the base frame 4
with M10*20mm
Allen head bolt 52, Ф10 Washer
53.
STEP2:
1. First make sure to connect the Computer
Control wire and Control wire of upright.
2. Then fix the computer on the uprights with
M8*20mm Allen head bolt 51.