4. Attach plastic covers
Final Checks
Your treadmill is now assembled. Please make the following
final checks before you power up for the first time.
•
Make sure all screws/bolts are tightened
•
Make sure the treadmill is on a flat, level surface
Power Up
1. Plug one end of power cable
into the treadmill as shown
2. Plug the other end into a suitable
AC outlet (220-240 volt, 50Hz)
3. Switch the treadmill on
using the on/off switch
4. Attach the safety
key to the console
NOTE: Before you run on the treadmill for the first time, use the Quick Start instructions on page 10 and allow the treadmill to
run independently for 10 minutes. Check the running mat is tightened correctly and runs smoothly. If you think the mat needs
adjusting please see page 14 for more details.
!
FIXINGS:
FIXINGS:
x 6
safety switch
ON/OFF
power cord
1. Using 6 x screws (C21) attach the plastic
cover to the base of the uprights
- use the screwdriver to tighten them well
C21
Part
No.
C21
C21
C21
C21
