![background image](http://html1.mh-extra.com/html/york-fitness/challenger-elite/challenger-elite_owners-manual_3516726013.webp)
1 • CHALLENGER Elite Bike | OWNER’S MANUAL
monitoring your heart rate
This cycle is fitted with 2 hand pulse sensors. To obtain a pulse reading
you must have both your left and right hands on the sensors at the
same time. Do not grip the hand sensors too tight and allow the
computer a few seconds to display the reading.
NOTE: Some people may not be able to obtain an accurate hand
pulse reading due to variations in circulation.
Adjusting the resistance
This cycle features a speed independent braking (resistance)
system. The resistance is controlled by a magnet, which is
moved closer or further away from the flywheel - the closer the
magnet is to the flywheel the higher the resistance. The magnet
is computer controlled. To adjust, simply scroll the wheel on the
console. The resistance levels go from 1 = easy to 16 = hard.
•
Adjusting the handlebars
The handlebars can be adjusted to match your individual requirements;
Loosen the T-bar bolt.
Tilt the handlebars into your desired position.
Tighten the T-bar bolt.
1.
2.
.
Adjusting the seat height
Loosen the hand wheel and pull the plunger.
Adjust the seat up or down to your required height - to line it up
correctly, make sure the number and line is visible at the top of
the seat post mounting tube - as shown in the diagram.
Let go of the plunger and re-tighten the hand wheel - make sure
it is screwed tightly.
NOTE: Do not pull the seat out too far - the maximum is indicated
with a piece of tape on the seat.
1.
2.
.
Cycle Features Explained
Hand pulse
sensors
scroll
wheel