www.yorkfitness.com
www.yorkfitness.com
5
Care & Maintenance
• This equipment should not be placed outdoors, in a garage or an outbuilding. Keep the equipment in a dry
place with as little temperature variation as possible.
• We recommend placing a mat beneath the equipment to protect both the equipment and your flooring.
• Always place the equipment in a dry environment.
• Use a warm, damp cloth to keep the product clean.
• No wet cleaning of electrical components. Unplug before any care and maintenance.
• The safety level of the equipment can be maintained only if it is regularly examined for damage and wear. This
includes any ropes, pulleys, nuts, bolts, moving parts, bushes, chains, wheels, bearings & connection points etc.
• Ensure that you inspect the product regularly - at least once a week is recommended.
• Ensure that all fixings are tight before use.
• Always replace damaged / worn components with original parts from the manufacturer.
PREPARE YOUR WORK AREA - It is important you assemble the product in a clean and uncluttered space.
WORK WITH A FRIEND - We recommend you have someone assist you with the assembly as some of the
components are quite heavy.
OPEN THE CARTON - Check any warnings on the carton and make sure you have it the right way up.
UNPACK THE CARTON - Remove all the parts and lay them out on the floor.
Make sure you have the following parts:
L-4 (10pcs)
Flat Washer
Ø6.5 x Ø22 x T1.5
L-3 (2pcs)
Axle Ø13x113
L-1 (2pcs)
Allen Bolt M10 x 20
L-5 (6pcs)
Allen Bolt M6 x 15
L-2 (2pcs)
Curve Washer
Ø10.5 x Ø25 x T1.5
L-9 (5pcs)
Screw M6 x 15
L-8 (1pc)
Flat Washer
Ø6.5 x 13 x T1.5
L-7 (1pc)
Pin Ø10 x 68
L-6 (1pc)
Axle Ø10 x 46.5
L-14 (7pcs)
Allen Bolt M8 x 15
L-13 (1pc)
Rubber Pad
Ø25 x Ø6.5 x T9.5
L-16 (7pcs)
Spring Washer
Ø8.5 x Ø12 x T3.0
L-15 (7pcs)
Flat Washer
Ø8.5 x Ø16 x T1.5
L-12 (2pcs)
Nylon Nut M10
L-11 (2pcs)
Flat Washer
Ø10.5 x Ø25 x T1.5
L-10 (2pcs)
Carriage Bolt M10 x 50
