York Fitness 50031, Owner'S Manual, Page: 5 / 36

www.yorkfitness.com www.yorkfitness.com 5
Assembly instructions
• Prepare your work area - It is important you assemble the product in a clean and uncluttered space.
• Work with a friend - We recommend you have someone assist you with the assembly as
some of the components are quite heavy.
• Open the carton - Check any warnings on the carton and make sure you have it the right way up.
• Unpack the carton - Remove all the parts and lay them out on the floor.
Make sure you have the following parts:
1 x 1
MAIN STABILIZER ASSEMBLY
RIGHT
2 x 1
MAIN STABILIZER ASSEMBLY
LEFT
x 2 4
WEIGHT TUBE
OD25.4 X 1768.2 X 2MM
6 x 1
MAIN UPPER ASSEMBLY
7 x 1
REAR UPPER ASSEMBLY
8 x 1
SEAT MOUNT ASSEMBLY
9 x 1
LEG EXTENSION ASSEMBLY
12 x 1
PRESS-PEC ARM ASSEMBLY
RIGHT
13 x 1
PRESS LOCK ASEEMBLY
14 x 1
PREACHER CURL ASSEMBLY
x 2
FOAM TUBE
16
20 x 4
FOAM ROLLER
STANDARD (OD90 X L180MM)
21 x 2
FOAM ROLLER
MEDIUM (OD100 X L295MM)
28 x 1
VINYL TOP WEIGHT PLATE
3KG
29 x 1
VINYL WEIGHT STACK
STEM ASSEMBLY (50KG)
36 x 1
RATIO BRACKET ASSEMBLY
37 x 1
DOUBLE ADJUSTABLE PULLEY
BRACKET ASSEMBLY
38 x 1
DOUBLE PULLEY
BRACKET ASSEMBLY
41 x 1
LOW PULLEY BAR ASSEMBLY
42 x 1
LAT BAR ASSEMBLY
3 x 2
WEIGHT TUBE MOUNT ASSEMBLY
SHORT
5 x 1
MAIN UPRIGHT ASSEMBLY
10 x 1
UPPER PRESS-PEC ASSEMBLY
11 x 1
PRESS-PEC ARM ASSEMBLY
LEFT
17 x 1
UPHOLSTERY
MAIN
UPHOLSTERY
SHAPED
19 x 1
15 x 2
PRESS HANDLE
18 x 1
UPHOLSTERY
SMALL
22 x 4
HANDGRIP
ID21.5 X L140MM
23 x 2
RUBBER BUMPER
OD-63.5 X ID-26 X L-25MM
27 x 9
VINYL WEIGHT PLATE
5KG
43 x 1
PIVOT ROD
19 X 5 X 106MM