background image

LIMITED WARRANTY

CONSUMER RESPONSIBILITY

In order to activate your warranty, you must mail in the supplied registration form found on the following page. 

Failure to send in the registration form will void your warranty. 

Fill in the form and send it to:

CUSTOMER SERVICE DEPARTMENT:

REGISTRATION

ORDERING

To order replacement parts, simply call our Customer Service Department.
Monday through Friday, 8:30am until 4:30pm (excluding holidays).
To help us assist you, please have the following information ready:
1) Model name or number from the cover of the manual.
2) Serial number located on the frame of the unit.
3) The part description and order number.

REPLACEMENT PARTS

Under no circumstances will YORK BARBELL LTD. be responsible for damages or failures that occur 
as a result of improper assembly, or failure to operate the product correctly.
This warranty does not cover misuse, abuse, freight damage and/or alterations or repairs not made by 
YORK BARBELL LTD. or a recommended service center.
In the event a return is necessary, call our 

Customer Service Department

 for further instructions.  

Under no circumstances will returns be allowed without the Return Authorization by our 

Customer Service Department.

  

Returns must be sent pre-paid, with the original packaging or equivalent.
This warranty does not apply when the product is used for rental or commercial use.
This warranty gives you specific legal rights, and you may also have other rights which  vary from 
state to state.

WARRANTY

YORK BARBELL LTD. warrants this product to be free from defects in workmanship and material, under 
normal use and conditions, for a period of one year on all steel parts, thirty days on all vinyl and upholstery, 
and ninety days on all other parts. 
This warranty extends to the original purchaser only.  
It is recommended that the original receipt be kept with the manual.
YORK BARBELL LTD. will provide a replacement part free of charge when a defect is found during the 
warranty period. If a repair is necessary, please contact our 

Customer Service Department.

YORK BARBELL (U.K.) LTD.

CHURCHILL WAY, DAVENTRY,
NORTHANTS, NN11 4YB ENGLAND
TEL: (01327) 701-824  
FAX: (01327) 706-704
E-MAIL: [email protected]

HELP LINE

(8:30am- 4:30pm)

YORK BARBELL (AUST.) LTD.

UNIT 1, LOT 2, SWAFFHAM ROAD,
MINTO, N.S.W. 2566 AUSTRALIA
TEL: (02) 9603-8444
FAX: (02) 9603-8555
E-MAIL: [email protected]

HELP LINE

(8:30am- 4:30pm)

Summary of Contents for 3100 MAG






























Reviews: