5
Press and hold
programming button S5
for about 2 seconds.
Press UP button in standard mode
or press any different button
in pulse mode.
Press and hold
programming button S5
for about 2 seconds.
Press DOWN button.
10. Adding transmitter
11. Deleting transmitter
12. Deleting all transmitters
13. Choosing swich mode
Transmitter work mode
has been set.
Transmitter
has been programmed.
Transmitter
has been removed.
All transmitters
has been removed.
Press
programming button S4.
Press programming button S5
to choose number 1.
Press and hold
S5 programming button
for about 2 seconds.
Press programming button S5
to choose number 0 or 1.
To confirm hold
the programming button S5
for about 2 seconds.
Press
programming button S4.
Press
programming button S5
to choose number 4.
Press and hold
S5 programming button
for about 2 seconds.
9. Programming work mode of the transmitter
It is possible to set independent work mode for each programmed transmitter.
The procedure must be performed every time before adding a new transmitter otherwise transmitter will accept previous
setting.
- Pulse mode (step by step)
- Standard mode (UP, STOP, DOWN)
Swich mode
has been set
Press
programming button S4.
Press
programming button S5
to choose number 2.
Press and hold
S5 programming button
for about 2 seconds.
Press
programming button S5
to choose number from 0 to 3.
To confirm hold
the programming button S5
for about 2 seconds.
- Latching switch
- Non-latching switch
- Impulse switch
