Press and hold programming
button for about
2 seconds.
Roller shutter will make
short up/down movements.
LED diode will flash on the panel.
LED diode will flash
on the panel.
Press
programming button
P2 on the remote.
Press
programming button
P2 on the remote
LED diode will flash
on the panel.
Roller shutter will make
short up/down movements.
LED diode will flash 4 times on
the panel. Transmitter has been
programmed.
Press
UP button.
2. Detailed description
3. Programming first transmitter
1. Longer than 10 seconds pause between series of button clicks during programming will cause device to switch off from
programming mode without saving any changes.
2. Programming the first transmitter removes the previously programmed transmitters from memory.
2
LED diode
micro USB
charging socket
programming
button
DS motor
connection output
4. Changing work direction
Press and hold programming
button for about 4 seconds.
Roller shutter will make
short up/down movements. LED diode
will flash 2 times on the panel.
Direction of work
has been changed.
