Yoo Digital PICKYOO, User Manual

Page: 8 / 40

P R e PA R I n g t h e m AC h I n e F o R U S e ________________________________
Clean and preheat the appliance before brewing, especially the pad holder and water reservoir.
Fill the water reservoir with cold water ,put pad holder in the machine without any coffee pads, then press
Single/Double cup button and let the machine operate for two times.
The pre-clean process can fill the whole system with hot water and the preheating make the brew coffee
at a right temperature.
O P e R AT I O N
_____________________________________________________
Remove the water reservoir and fill with cold water up to Max indication and put it back into the 1.
machine.
Press the on/off button to preheat the machine.
2.
Lift the lever to release the pad holder, then place coffee pad (s) in the center (1 pad for single cup 3.
holder; 2 pads for double cup holder.)
Put the pad holder back into the machine and lock the lever. ℃the stand-by status℃
4.
Put a cup under the outflow opening, press the single/double cup button to starting brewing. 5.
The brewing process will auto-stop (or you can press the ON/OFF button if need to make a pause), 6.
the button light will turn-off. Lift the lever after 10s, then remove and discard the coffee pad(s) by pull
the pad holder out of the coffee machine and emptying it. Coffee pad(s) should not be used more
than one time.
Put the coffee holder into the machine again, and operate a brew process to clean the internal brew
7.
system. Then pull out the holder (under the guide 6) and clean it in water.
B R e w vo L U m e ____________________________________________
the double cup volume is default at 200ml; the single cup volume is default at 100ml.