1.Power-on and Power-off
Set the [Power Switch] to <ON>, and the flash
will be turned on and start being charged.
After turned on, the <Recycle Indicator> will
be turned on with red light,which indicates it
is ready to fire.
If the battery power is low, the flash will show
the <Low Battery Icon> with the <Recycle Indicator> blinking in blue, and
then automatically turned off. Please replace the battery currently.
After use, set the [Power Switch] to <OFF> to turn off the flash. It’ s
recommended to turn off the flash before you take out the batteries.
2.Button Lock Function
Set the [Power Switch] to <LOCK>, to lock the [DIAL] and function buttons
of the flash. This function helps to prevent the flash settings from being
accidentally changed. When this function is on, if you operate this
function, <LOCK> will be displayed on the LCD panel.
3.Test Flash
After the <Recycle Indicator> turns red, you
can press the [TEST] button to test whether
the flash fires normally.
4.TTL Mode
Press the [MODE] button to switch the flash
mode to TTL mode. In TTL mode, the camera's
metering system will detect the flash lighting
reflected from the subject, thereby adjust the
flash output automatically , so that the subject
and the background obtain balanced
exposure. The product supports functions such
as exposure compensation, high-speed sync, rear curtain sync,
exposure lock and camera menu access.
In TTL mode, you can also compensate the flash brightness. The
compensation range is -3EV to +3EV with the
accuracy of 1/3EV.
5.M Mode
Press the [MODE] button to switch the flash
mode to M mode. In M mode, you can set the
flash brightness according to your needs.
Basic Functions
10
