1. Hold down the [CH SET] button for several seconds of the
transmitter until the channel indicator blinks for 3 times and
then keep lighting, enable the mix control mode.
2. Flash mode of the transmitter will be fixed at E-TTL and the
zoom setting is disabled.
3. Set the parameters of each flashes via it own control panel.
Mix Control Mode
21
Set the flash on each receiver in different flash modes as
Manual/E-TTL/Multi for mix control, the settings of the flash
is prior , channel indicator of the transmitter will keep
lighting when enabled this control mode. Supports type A/B
cameras using.
In the mix control mode, set items via the flash it
supports: Flash mode (output), FEB, FEC,
Zoom etc.
Set the shutter sync via camera menu and the flash
set is invalid (Type B camera defaults to hi-speed sync).
※ Disable the mix control mode by hold down [CH
SET] button again then it will return to remote
control mode (the channel indicator goes out in
standby state).(p.11)
