Yongnuo YN-622N, User Manual, Page: 15 / 22

13
Ÿ
When half press the shutter button of the camera ,
the hot - shoe flash will be awaken .
Ÿ
In standby state , pressing the [ TEST /-] button of the
transceiver will awake the flash . When loosening the
button , the flash of the group having been selected will
fire a test flash.
Ÿ
In transmitting state , short press the [ TEST /-] button
will fire a test flash.
Ÿ
Refer to the following figure, the transmitter sets
A+B two groups of flash , hold down the [Test/-] button,
the flash on A and B of the receiver will be awakened,
and when loosening [TEST/-] button will fire a test flash.
※ If the flash can not be awakened, manually
awaken the flash before shooting.
※ Using PC port to connect with flash without the
awakening function.
※ A l l t h e i n d i c a t o r s g o i n g o u t w h e n f l a s h
fires(Receiver).
Flash awaking and testing flash